1/5
${data.index + 1}/${data.total}
Description
Product Introduction
1000D Oxford Cloth Bulletproof Vest Level IV One-button Quick Release Laser Cutting PALS System Protective Body Armor,Front and rear bulletproof plates and Molle on both sides to connect more small bags or other items. High-performance materials are used to ensure the lightweight bulletproof effect of the vest. The outer layer of the vest is made of encrypted Oxford cloth, which is wear-resistant and tear-resistant, and can withstand the test of various harsh environments. The shoulder and waist sizes are adjustable, The vest is precisely designed and rigorously structured, which can provide soldiers with super protection.
- Size: One size, adjustable size suitable for all adults weighing 120 pounds to 270 pounds
- Fabric: Oxford cloth
- Level: NIJ IIIA, NIJ III, NIJ IV
- Applicable scenarios: outdoor adventure, tactics, military
- Waist circumference can be extended to: 125-165cm
- Shoulder adjustable range:25-38cm
- Product structure:
Outer Layer Oxford cloth material Middle Layer Bulletproof layer (NIJ IIIA, NIJ III, NIJ IV) Lnner Layer sweat-absorbing and moisture-wicking material
Product features
- Quick removal: One-button quick removal, greatly improving mobility and flexibility on the battlefield.
- Strong breathability:The inner layer uses a honeycomb breathable layer and a block air diversion system, which is breathable, sweat-absorbent and quick-drying.
- Adjustable:The shoulders and waist have one-button quick-release buckles, which are quick and practical.
- MOLLE system: Other tactical equipment such as flashlights, water bottles and other accessory bags can be hung externally.
- Multifunctional design: In addition to basic protection, the vest also has a laser-cut PALS system on the front panel and an expandable universal zipper on the side to meet the use of a variety of scenarios.
- Encrypted Oxford cloth material: The vest uses encrypted Oxford cloth as the main material, which has excellent wear resistance and tear resistance, and can maintain its performance even in harsh environments.
Product Performance
- Stab-proof: The stab-proof inner core is composed of 16 layers of high-performance polyethylene, and the stab-proof vest's stab-proof layer is made of a black dense waterproof and light-proof protective cover.
Stab resistance was tested at room temperature using standard test tools and counterweights, resulting in a 2.4 kg drop. The impact energy of 24J plus or minus 0.5J can effectively sprint into the stab-resistant clothing at 0 degrees, 45 degrees, and penetration angles. The tip of the knife will not penetrate. - Bulletproof: Protective layer structure: The protective layer structure of bulletproof stab-proof clothing is composed of 45 layers of polyethylene fiber non-weft cloth (four layers orthogonal) + 1 layer of 4.5mm thick foam.
- Composition: The bulletproof stab-proof clothing consists of a jacket, a bulletproof layer and a bulletproof layer protective cover. The jacket is removable and washable, and the shoulder and waist are adjustable.
- Sleeve sealing performance: The protective layer is sealed with an anti-seepage and anti-seepage black protective sleeve, and the sealing edge is uniform. The protective cover material is impermeable to water, and the anti-hydrostatic pressure is not less than 18kPa
- Wearing flexibility: flexible wearing, easy to put on and take off. After wearing, the free movement of the arm and the human body's kneeling, jumping, running, pitching, turning and other movements should not be significantly restricted.
- Ballistic resistance at room temperature: Tested with 1979-style 7.62mm light submachine guns and 1951-style 7.62mm pistol cartridges (lead core). In the case of an effective hit, the bullet is blocked, and the maximum groove depth should be less than or equal to 25mm.
- Immersion bulletproof: Under normal temperature, soak the bulletproof stab-proof clothing in water for 30 minutes, and then conduct the bulletproof test. In the case of effective blows, to withstand bullets, the maximum concave depth of the backing should be less than or equal to 25mm.
- High temperature ballistic resistance: After high temperature test (+55℃±2℃, constant temperature 4h), test the ballistic resistance within 15min. In the case of an effective hit, the bullet is blocked, and the maximum sag depth of the backing is ≤25min.
- Low temperature ballistic performance: After the low temperature test (-20℃±2℃, constant temperature for 4h), the ballistic performance test is carried out within 15min. In the case of an effective hit, the bullet is blocked, and the maximum sag depth of the backing is ≤25min.
- Bulletproof damp heat performance: After the damp heat test (70℃±2℃, 80% relative humidity, 240h), the bulletproof performance test is carried out. In the case of effective hitting, the bullet is blocked, and the maximum sinking backing depth is less than or equal to 25min.