Chest storage bag Molle system can be freely matched with equipment bags Adjustable shoulder strap, adjustable advanced waist belt The words Velcro can be changed at will Can put stab-proof inner core, bullet-proof inner core
II.Performance Testing:
Stab-proof: The stab-proof inner core is composed of 16 layers of high-performance polyethylene, and the stab-proof layer of the stab-proof vest is made of a black dense waterproof and light-proof protective sleeve. Puncture resistance is tested using standard test tools and weights to create a 2.4kg drop at room temperature. The impact energy of 24J plus or minus 0.5J can effectively sprint into the anti-stab suit at 0 degrees, 45 degrees, and penetration angles. The tip of the knife will not penetrate.
Bulletproof: Protective layer structure: The protective layer structure of the bulletproof and stab-proof clothing is composed of 45 layers of polyethylene fiber weft-free cloth (four orthogonal layers) + 1 layer of 4.5mm thick foam. Can block 7.62×51MM FMJ M80 bullets. Composition: Bulletproof and stab-proof clothing consists of jacket, bulletproof layer and bulletproof layer protective cover. The jacket is removable, washable and adjustable at the shoulders and waist. Shell sealing performance: The protective layer is sealed with a water-tight and impermeable black protective shell with even sealing edges. The protective cover material is waterproof and can withstand hydrostatic pressure of not less than 18kPa. Flexible to wear: Flexible to wear, easy to put on and take off. After wearing it, the free movement of the arms and the human body's kneeling, jumping, running, pitching, turning and other movements cannot be significantly restricted. Area of the protected area: The area of the protected area is about 0.15 square meters
Room Temperature Ballistic Performance: Tested using Model 1979 7.62mm lightweight and Model 1951 7.62mm (lead core). In the case of an effective hit, the bullet is blocked and the maximum recess depth should be less than or equal to 25mm. Water immersion bulletproof: Soak the bulletproof and stab-proof clothing in room temperature water for 30 minutes, and then perform a bulletproof test. In the case of effective hits, to be able to resist bullets, the maximum dent depth of the backing should be less than or equal to 25mm. High-temperature ballistic resistance: After the high-temperature test (+55℃±2℃, constant temperature for 4 hours), test the bulletproof performance within 15 minutes. In the case of an effective hit, the bullet is blocked, and the maximum penetration depth of the backing is less than or equal to 25 minutes. Low-temperature bulletproof performance: After the low-temperature test (-20℃±2℃, constant temperature for 4 hours), conduct the bulletproof performance test within 15 minutes. In the case of an effective hit, the bullet is blocked, and the maximum penetration depth of the backing is less than or equal to 25 minutes. Bulletproof and damp-heat performance: After passing the damp-heat test (70℃±2℃, relative humidity 80%, 240h), the bulletproof performance test is carried out. In the case of an effective hit, the warhead can be blocked, and the maximum dent backing depth is less than or equal to 25 minutes. Body armor level: Level 3
NIJ Ballistic Test Report All Helmetbro body armor and vests must pass the NIJ ballistic test before they are sold on the market. They are essential tactical equipment for soldiers and police.
